K
Klaxon
Gast
Hallo zusammen,
das Sorgenkind ist eine Philips Dbox2.
Vorgeschichte:
- lief über 1 Jahr problemlos, mit Originalsoftware(ausgemacht immer mit Stand-by, nicht Deep-Stand by)
- dann Stromausfall, liess sich nicht mehr booten. Autom. Software aktualisierung hat nicht geklappt(ewig auf „Einen Moment bitte“ stehen geblieben)
- Debug-Mode enabled mit MHC-Methode
- diverse Images geflasht
Problem:
Box bootet nicht richtig, es wechseln immer auf dem Display der Box die Anzeigen des Debug-Modes und dann die des jeweiligen Images(mit Hinweis Booting), und das als Endlosschleife.
Zweimal bisher wurde aber gebootet, also so das am Display dann schon „Das Erste“ stand, und auch zB. das Menü angewählt werden konnte, allerdings mit vielen Artefakten, oder Farbklötzchen, die die Sicht auf das Menü verhinderten. Also noch mal geflasht, aber seit nun ca. 20 mal flashen passiert nichts mehr ausser das oben beschriebene.
Flashen funktioniert am Besten über die Methode ohne Nullmodem-Kabel, über den Boot-Manager gibt es meistens das Problem, das der Prozeß immer wieder „initialized“ wird, und zwar nach der Zeile mit dem FB Logo.
Habe auch den Tipp von DieMade vom tuxbox-Forum benutzt(http/forum.tuxbox.org/forum/viewtopic ... 35476&sid=), und nach dem Flashen „cmp.l 120000 10020000 1F8000“ eingegeben, leider auch, wie bei dem anderen User, mit dem Ergebnis, dass anscheinend ein Hardwarefehler vorliegt.
Hier der Log vom Flashen mit der Methode ohne Nullmodem:
.debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-58.73.03.08.00.00-3c
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.55, My IP 192.168.0.56
debug: Sending TFTP-request for file C/dbox/ppcboot
will verify ELF image, start= 0x800000, size= 222280
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jul 12 2001 - 02:51:2cool
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2c-d5-db
FLASH: 8 MB
FB logo at: none
Input: serial
Output: serial
Any key druecken um das Flashing abzubrechen.. : 0
LCD driver (KS0713) initialized
Logo FlashingBOOTP broadcast 1
TFTP from server 192.168.0.55; our IP address is 192.168.0.56
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: ###########################################################################
#######################################################################
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################
done
lo: 0x100000unprotecting 4
[10001]-> [0] [S800080] unprotecting 5
[10001]-> [0] [S800080] unprotecting 6
[10001]-> [0] [S800080] unprotecting 7
[10001]-> [0] [S800080] unprotecting 8
[10001]-> [0] [S800080] unprotecting 9
[10001]-> [0] [S800080] unprotecting a
[10001]-> [0] [S800080] unprotecting b
[10001]-> [0] [S800080] unprotecting c
[10001]-> [0] [S800080] unprotecting d
[10001]-> [0] [S800080] unprotecting e
[10001]-> [0] [S800080] unprotecting f
[10001]-> [0] [S800080] unprotecting 10
[10001]-> [0] [S800080] unprotecting 11
[10001]-> [0] [S800080] unprotecting 12
[10001]-> [0] [S800080] unprotecting 13
[10001]-> [0] [S800080] unprotecting 14
[10001]-> [0] [S800080] unprotecting 15
[10001]-> [0] [S800080] unprotecting 16
[10001]-> [0] [S800080] unprotecting 17
[10001]-> [0] [S800080] unprotecting 18
[10001]-> [0] [S800080] unprotecting 19
[10001]-> [0] [S800080] unprotecting 1a
[10001]-> [0] [S800080] unprotecting 1b
[10001]-> [0] [S800080] unprotecting 1c
[10001]-> [0] [S800080] unprotecting 1d
[10001]-> [0] [S800080] unprotecting 1e
[10001]-> [0] [S800080] unprotecting 1f
[10001]-> [0] [S800080] unprotecting 20
[10001]-> [0] [S800080] unprotecting 21
[10001]-> [0] [S800080] unprotecting 22
[10001]-> [0] [S800080] unprotecting 23
[10001]-> [0] [S800080] unprotecting 24
[10001]-> [0] [S800080] unprotecting 25
[10001]-> [0] [S800080] unprotecting 26
[10001]-> [0] [S800080] unprotecting 27
[10001]-> [0] [S800080] unprotecting 28
[10001]-> [0] [S800080] unprotecting 29
[10001]-> [0] [S800080] unprotecting 2a
[10001]-> [0] [S800080] unprotecting 2b
[10001]-> [0] [S800080] unprotecting 2c
[10001]-> [0] [S800080] unprotecting 2d
[10001]-> [0] [S800080] unprotecting 2e
[10001]-> [0] [S800080] unprotecting 2f
[10001]-> [0] [S800080] unprotecting 30
[10001]-> [0] [S800080] unprotecting 31
[10001]-> [0] [S800080] unprotecting 32
[10001]-> [0] [S800080] unprotecting 33
[10001]-> [0] [S800080] unprotecting 34
[10001]-> [0] [S800080] unprotecting 35
[10001]-> [0] [S800080] unprotecting 36
[10001]-> [0] [S800080] unprotecting 37
[10001]-> [0] [S800080] unprotecting 38
[10001]-> [0] [S800080] unprotecting 39
[10001]-> [0] [S800080] unprotecting 3a
[10001]-> [0] [S800080] unprotecting 3b
[10001]-> [0] [S800080] unprotecting 3c
[10001]-> [0] [S800080] unprotecting 3d
[10001]-> [0] [S800080] unprotecting 3e
[10001]-> [0] [S800080] unprotecting 3f
[10001]-> [0] [S800080] unprotecting 40
[10001]-> [0] [S800080] unprotecting 41
[10001]-> [0] [S800080] unprotecting 42
[10001]-> [0] [S800080] Un-Protected 63 sectors
Erase Flash from 0x10020000 to 0x107fffff
sector 66 .... done
Erased 63 sectors
Copy to Flash... done
LCD driver (KS0713) initialized
Logo Flashing done !
dbox2-ppcboot> cmp.l 120000 10020000 1F8000
word at 0x00120000 (0x19852003) != word at 0x10020000 (0xf0a4ffff)
Total of 0 words were the same
dbox2-ppcboot>
Beim Booten mit gedrückter Pfeil-nach-oben-Taste siehts so aus:
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-58.73.03.08.00.00-3c
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: &_text 0x10000, &_etext 0x26d40, &_data 0x26d40, &_edata 0x2a83c
debug: &_end 0x357c4, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>
Sicherlich ein Hardwarefehler, was könnte es sein?
Danke fürs Lesen schonmal
Gruß,
Klaxon.
das Sorgenkind ist eine Philips Dbox2.
Vorgeschichte:
- lief über 1 Jahr problemlos, mit Originalsoftware(ausgemacht immer mit Stand-by, nicht Deep-Stand by)
- dann Stromausfall, liess sich nicht mehr booten. Autom. Software aktualisierung hat nicht geklappt(ewig auf „Einen Moment bitte“ stehen geblieben)
- Debug-Mode enabled mit MHC-Methode
- diverse Images geflasht
Problem:
Box bootet nicht richtig, es wechseln immer auf dem Display der Box die Anzeigen des Debug-Modes und dann die des jeweiligen Images(mit Hinweis Booting), und das als Endlosschleife.
Zweimal bisher wurde aber gebootet, also so das am Display dann schon „Das Erste“ stand, und auch zB. das Menü angewählt werden konnte, allerdings mit vielen Artefakten, oder Farbklötzchen, die die Sicht auf das Menü verhinderten. Also noch mal geflasht, aber seit nun ca. 20 mal flashen passiert nichts mehr ausser das oben beschriebene.
Flashen funktioniert am Besten über die Methode ohne Nullmodem-Kabel, über den Boot-Manager gibt es meistens das Problem, das der Prozeß immer wieder „initialized“ wird, und zwar nach der Zeile mit dem FB Logo.
Habe auch den Tipp von DieMade vom tuxbox-Forum benutzt(http/forum.tuxbox.org/forum/viewtopic ... 35476&sid=), und nach dem Flashen „cmp.l 120000 10020000 1F8000“ eingegeben, leider auch, wie bei dem anderen User, mit dem Ergebnis, dass anscheinend ein Hardwarefehler vorliegt.
Hier der Log vom Flashen mit der Methode ohne Nullmodem:
.debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-58.73.03.08.00.00-3c
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.55, My IP 192.168.0.56
debug: Sending TFTP-request for file C/dbox/ppcboot
will verify ELF image, start= 0x800000, size= 222280
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jul 12 2001 - 02:51:2cool
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2c-d5-db
FLASH: 8 MB
FB logo at: none
Input: serial
Output: serial
Any key druecken um das Flashing abzubrechen.. : 0
LCD driver (KS0713) initialized
Logo FlashingBOOTP broadcast 1
TFTP from server 192.168.0.55; our IP address is 192.168.0.56
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: ###########################################################################
#######################################################################
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################
done
lo: 0x100000unprotecting 4
[10001]-> [0] [S800080] unprotecting 5
[10001]-> [0] [S800080] unprotecting 6
[10001]-> [0] [S800080] unprotecting 7
[10001]-> [0] [S800080] unprotecting 8
[10001]-> [0] [S800080] unprotecting 9
[10001]-> [0] [S800080] unprotecting a
[10001]-> [0] [S800080] unprotecting b
[10001]-> [0] [S800080] unprotecting c
[10001]-> [0] [S800080] unprotecting d
[10001]-> [0] [S800080] unprotecting e
[10001]-> [0] [S800080] unprotecting f
[10001]-> [0] [S800080] unprotecting 10
[10001]-> [0] [S800080] unprotecting 11
[10001]-> [0] [S800080] unprotecting 12
[10001]-> [0] [S800080] unprotecting 13
[10001]-> [0] [S800080] unprotecting 14
[10001]-> [0] [S800080] unprotecting 15
[10001]-> [0] [S800080] unprotecting 16
[10001]-> [0] [S800080] unprotecting 17
[10001]-> [0] [S800080] unprotecting 18
[10001]-> [0] [S800080] unprotecting 19
[10001]-> [0] [S800080] unprotecting 1a
[10001]-> [0] [S800080] unprotecting 1b
[10001]-> [0] [S800080] unprotecting 1c
[10001]-> [0] [S800080] unprotecting 1d
[10001]-> [0] [S800080] unprotecting 1e
[10001]-> [0] [S800080] unprotecting 1f
[10001]-> [0] [S800080] unprotecting 20
[10001]-> [0] [S800080] unprotecting 21
[10001]-> [0] [S800080] unprotecting 22
[10001]-> [0] [S800080] unprotecting 23
[10001]-> [0] [S800080] unprotecting 24
[10001]-> [0] [S800080] unprotecting 25
[10001]-> [0] [S800080] unprotecting 26
[10001]-> [0] [S800080] unprotecting 27
[10001]-> [0] [S800080] unprotecting 28
[10001]-> [0] [S800080] unprotecting 29
[10001]-> [0] [S800080] unprotecting 2a
[10001]-> [0] [S800080] unprotecting 2b
[10001]-> [0] [S800080] unprotecting 2c
[10001]-> [0] [S800080] unprotecting 2d
[10001]-> [0] [S800080] unprotecting 2e
[10001]-> [0] [S800080] unprotecting 2f
[10001]-> [0] [S800080] unprotecting 30
[10001]-> [0] [S800080] unprotecting 31
[10001]-> [0] [S800080] unprotecting 32
[10001]-> [0] [S800080] unprotecting 33
[10001]-> [0] [S800080] unprotecting 34
[10001]-> [0] [S800080] unprotecting 35
[10001]-> [0] [S800080] unprotecting 36
[10001]-> [0] [S800080] unprotecting 37
[10001]-> [0] [S800080] unprotecting 38
[10001]-> [0] [S800080] unprotecting 39
[10001]-> [0] [S800080] unprotecting 3a
[10001]-> [0] [S800080] unprotecting 3b
[10001]-> [0] [S800080] unprotecting 3c
[10001]-> [0] [S800080] unprotecting 3d
[10001]-> [0] [S800080] unprotecting 3e
[10001]-> [0] [S800080] unprotecting 3f
[10001]-> [0] [S800080] unprotecting 40
[10001]-> [0] [S800080] unprotecting 41
[10001]-> [0] [S800080] unprotecting 42
[10001]-> [0] [S800080] Un-Protected 63 sectors
Erase Flash from 0x10020000 to 0x107fffff
sector 66 .... done
Erased 63 sectors
Copy to Flash... done
LCD driver (KS0713) initialized
Logo Flashing done !
dbox2-ppcboot> cmp.l 120000 10020000 1F8000
word at 0x00120000 (0x19852003) != word at 0x10020000 (0xf0a4ffff)
Total of 0 words were the same
dbox2-ppcboot>
Beim Booten mit gedrückter Pfeil-nach-oben-Taste siehts so aus:
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-58.73.03.08.00.00-3c
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: &_text 0x10000, &_etext 0x26d40, &_data 0x26d40, &_edata 0x2a83c
debug: &_end 0x357c4, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>
Sicherlich ein Hardwarefehler, was könnte es sein?
Danke fürs Lesen schonmal
Gruß,
Klaxon.