Thema erstellen
Foren
Neue Beiträge
Foren durchsuchen
Aktuelles
Neue Beiträge
Neueste Aktivitäten
Blog
Anmelden
Registrieren
Aktuelles
Suche
Suche
Nur Titel durchsuchen
Von:
Neue Beiträge
Foren durchsuchen
Menü
Anmelden
Registrieren
App installieren
Installieren
Foren
Reparaturtips braune Ware
Reparatur von LCD Plasma Fernsehern sowie Beamer
Philips 65OLED803/12 Geht nicht an. Led blinkt.
JavaScript ist deaktiviert. Für eine bessere Darstellung aktiviere bitte JavaScript in deinem Browser, bevor du fortfährst.
Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden.
Du solltest ein Upgrade durchführen oder einen
alternativen Browser
verwenden.
Auf Thema antworten
Beitrag
<blockquote data-quote="wohalli" data-source="post: 370924" data-attributes="member: 85013"><p>2. Teil:</p><p></p><p>Do USB upgrade</p><p>u1USBBlock = 0x017d1b40</p><p>USB: Vbus turn up time = 8414 ms, Max =0 ms.</p><p></p><p> No USB device.</p><p>/dev is created.</p><p>/mnt is already existed. That is OK.</p><p>/dev/msdc is created.</p><p>/mnt/msdc_0 is created.</p><p>ERR: mount /dev/msdc_0 as /mnt/msdc_0 fail.</p><p>return value:-25</p><p></p><p>Error: SD mount fail, USB upgrade stop</p><p>No cookie file or no Usb detected...</p><p>Call LDR_setUnBoxUpgradeNvmFlag at line:1444</p><p>@ui4_unboxEepAddr is 0x3177</p><p>@ui1_unboxEepBuffer[0] is 0</p><p>@ui1_unboxEepBuffer[1] is 0</p><p>[ACD Loader] 12V status = 1,continue booting.recovery_opcode</p><p></p><p> before_ui1_raw_data_1[0]_2[0]_3[0]= 0xfa 0xfa 0xfa</p><p> before_ui1_raw_data_1[1]_2[1]_3[1]= 0x2c 0x2c 0x2c</p><p> before_ui1_raw_data_1[2]_2[2]_3[2]= 0x33 0x33 0x33</p><p> before_ui1_raw_data_1[3]_2[3]_3[3]= 0x50 0x50 0x50</p><p> before_ui1_raw_data_1[4]_2[4]_3[4]= 0x43 0x43 0x43</p><p> before_ui1_raw_data_1[5]_2[5]_3[5]= 0x48 0x48 0x48</p><p> before_ui1_raw_data_1[6]_2[6]_3[6]= 0x00 0x00 0x00</p><p> before_ui1_raw_data_1[7]_2[7]_3[7]= 0x8b 0x8b 0x8b</p><p> before_ui1_raw_data_1[8]_2[8]_3[8]= 0x03 0x03 0x03</p><p> before_ui1_raw_data_1[9]_2[9]_3[9]= 0xc3 0xc3 0xc3</p><p> before_ui1_raw_data_1[10]_2[10]_3[10]= 0xf4 0xf4 0xf4</p><p> before_ui1_raw_data_1[11]_2[11]_3[11]= 0xf6 0xf6 0xf6</p><p> before_ui1_raw_data_1[12]_2[12]_3[12]= 0x15 0x15 0x15</p><p> before_ui1_raw_data_1[13]_2[13]_3[13]= 0x16 0x16 0x16</p><p> before_ui1_raw_data_1[14]_2[14]_3[14]= 0x34 0x34 0x34</p><p> before_ui1_raw_data_1[15]_2[15]_3[15]= 0x90 0x90 0x90</p><p> before_ui1_raw_data_1[16]_2[16]_3[16]= 0xa1 0xa1 0xa1</p><p> before_ui1_raw_data_1[17]_2[17]_3[17]= 0x01 0x01 0x01recovery_opcode(3)</p><p>recovery_opcode(4)</p><p></p><p> after_ui1_raw_data_1[0]_2[0]_3[0]=0xfa 0xfa 0xfa</p><p> after_ui1_raw_data_1[1]_2[1]_3[1]=0x2c 0x2c 0x2c</p><p> after_ui1_raw_data_1[2]_2[2]_3[2]=0x33 0x33 0x33</p><p> after_ui1_raw_data_1[3]_2[3]_3[3]=0x50 0x50 0x50</p><p> after_ui1_raw_data_1[4]_2[4]_3[4]=0x43 0x43 0x43</p><p> after_ui1_raw_data_1[5]_2[5]_3[5]=0x48 0x48 0x48</p><p> after_ui1_raw_data_1[6]_2[6]_3[6]=0x00 0x00 0x00</p><p> after_ui1_raw_data_1[7]_2[7]_3[7]=0x8b 0x8b 0x8b</p><p> after_ui1_raw_data_1[8]_2[8]_3[8]=0x03 0x03 0x03</p><p> after_ui1_raw_data_1[9]_2[9]_3[9]=0xc3 0xc3 0xc3</p><p> after_ui1_raw_data_1[10]_2[10]_3[10]=0xf4 0xf4 0xf4</p><p> after_ui1_raw_data_1[11]_2[11]_3[11]=0xf6 0xf6 0xf6</p><p> after_ui1_raw_data_1[12]_2[12]_3[12]=0x15 0x15 0x15</p><p> after_ui1_raw_data_1[13]_2[13]_3[13]=0x16 0x16 0x16</p><p> after_ui1_raw_data_1[14]_2[14]_3[14]=0x34 0x34 0x34</p><p> after_ui1_raw_data_1[15]_2[15]_3[15]=0x90 0x90 0x90</p><p> after_ui1_raw_data_1[16]_2[16]_3[16]=0xa1 0xa1 0xa1</p><p> after_ui1_raw_data_1[17]_2[17]_3[17]=0x01 0x01 0x01[CMain 1070][OLED Tcon error handle]display_techonlogy = 1</p><p>[CMain 1079][OLED Tcon error handle]EEPROM_TCON_ERROR_COUNT=3.</p><p>[CMain 1082][OLED Tcon error handle]Go into protection mode.</p><p>Disable VGA wakeup</p><p>support WOL</p><p>_PDWNC_SetupEthernetWakeup(WOL):u4WOWLVal:0x0</p><p></p><p>wol off, MAC register switch to arm</p><p></p><p>[GPIO_MtkPowerOffFunc]1453 set GPIO 223, value 0.</p><p></p><p> set GPIO 207, value 0.</p><p>Standby</p><p>PDWNC_TPV_SetupWakeupSourceWOWLAN: u1Wowlan = 0</p><p>PDWNC_TPV_SetupWakeupSourceWOWLAN: uiSwitchOnWithchromecast = 0</p><p>PDWNC_TPV_SetupWakeupSourceWOWLAN: u1Wowlan == DISABLE_WOWLAN</p><p>CTN is not XXPUS9104</p><p>u1RedLedBriValue : 15</p><p>PDWNC_TPV_SetupSilentReboot: ui1_silent_reboot = 0</p><p>PDWNC_TPV_SetupSilentReboot: no need to setup register time of silent reboot</p><p>PDWNC_EnterPowerDown(0,100)</p><p>SIF_Master0: V2 design</p><p>SIF_Master1: V2 design</p><p>SIF_Master2: V2 design</p><p>SIF_Master3: V2 design</p><p>SIF_Master4: V2 design</p><p>Master5 only Used in secure mode!</p><p>SWITCH_T8032</p><p>▒"</p><p> Now is writting DIV_SEL as 0x78!</p><p> ▒T8032 vSetTimer▒(TconError has detected, Blinking the Led</p></blockquote><p></p>
[QUOTE="wohalli, post: 370924, member: 85013"] 2. Teil: Do USB upgrade u1USBBlock = 0x017d1b40 USB: Vbus turn up time = 8414 ms, Max =0 ms. No USB device. /dev is created. /mnt is already existed. That is OK. /dev/msdc is created. /mnt/msdc_0 is created. ERR: mount /dev/msdc_0 as /mnt/msdc_0 fail. return value:-25 Error: SD mount fail, USB upgrade stop No cookie file or no Usb detected... Call LDR_setUnBoxUpgradeNvmFlag at line:1444 @ui4_unboxEepAddr is 0x3177 @ui1_unboxEepBuffer[0] is 0 @ui1_unboxEepBuffer[1] is 0 [ACD Loader] 12V status = 1,continue booting.recovery_opcode before_ui1_raw_data_1[0]_2[0]_3[0]= 0xfa 0xfa 0xfa before_ui1_raw_data_1[1]_2[1]_3[1]= 0x2c 0x2c 0x2c before_ui1_raw_data_1[2]_2[2]_3[2]= 0x33 0x33 0x33 before_ui1_raw_data_1[3]_2[3]_3[3]= 0x50 0x50 0x50 before_ui1_raw_data_1[4]_2[4]_3[4]= 0x43 0x43 0x43 before_ui1_raw_data_1[5]_2[5]_3[5]= 0x48 0x48 0x48 before_ui1_raw_data_1[6]_2[6]_3[6]= 0x00 0x00 0x00 before_ui1_raw_data_1[7]_2[7]_3[7]= 0x8b 0x8b 0x8b before_ui1_raw_data_1[8]_2[8]_3[8]= 0x03 0x03 0x03 before_ui1_raw_data_1[9]_2[9]_3[9]= 0xc3 0xc3 0xc3 before_ui1_raw_data_1[10]_2[10]_3[10]= 0xf4 0xf4 0xf4 before_ui1_raw_data_1[11]_2[11]_3[11]= 0xf6 0xf6 0xf6 before_ui1_raw_data_1[12]_2[12]_3[12]= 0x15 0x15 0x15 before_ui1_raw_data_1[13]_2[13]_3[13]= 0x16 0x16 0x16 before_ui1_raw_data_1[14]_2[14]_3[14]= 0x34 0x34 0x34 before_ui1_raw_data_1[15]_2[15]_3[15]= 0x90 0x90 0x90 before_ui1_raw_data_1[16]_2[16]_3[16]= 0xa1 0xa1 0xa1 before_ui1_raw_data_1[17]_2[17]_3[17]= 0x01 0x01 0x01recovery_opcode(3) recovery_opcode(4) after_ui1_raw_data_1[0]_2[0]_3[0]=0xfa 0xfa 0xfa after_ui1_raw_data_1[1]_2[1]_3[1]=0x2c 0x2c 0x2c after_ui1_raw_data_1[2]_2[2]_3[2]=0x33 0x33 0x33 after_ui1_raw_data_1[3]_2[3]_3[3]=0x50 0x50 0x50 after_ui1_raw_data_1[4]_2[4]_3[4]=0x43 0x43 0x43 after_ui1_raw_data_1[5]_2[5]_3[5]=0x48 0x48 0x48 after_ui1_raw_data_1[6]_2[6]_3[6]=0x00 0x00 0x00 after_ui1_raw_data_1[7]_2[7]_3[7]=0x8b 0x8b 0x8b after_ui1_raw_data_1[8]_2[8]_3[8]=0x03 0x03 0x03 after_ui1_raw_data_1[9]_2[9]_3[9]=0xc3 0xc3 0xc3 after_ui1_raw_data_1[10]_2[10]_3[10]=0xf4 0xf4 0xf4 after_ui1_raw_data_1[11]_2[11]_3[11]=0xf6 0xf6 0xf6 after_ui1_raw_data_1[12]_2[12]_3[12]=0x15 0x15 0x15 after_ui1_raw_data_1[13]_2[13]_3[13]=0x16 0x16 0x16 after_ui1_raw_data_1[14]_2[14]_3[14]=0x34 0x34 0x34 after_ui1_raw_data_1[15]_2[15]_3[15]=0x90 0x90 0x90 after_ui1_raw_data_1[16]_2[16]_3[16]=0xa1 0xa1 0xa1 after_ui1_raw_data_1[17]_2[17]_3[17]=0x01 0x01 0x01[CMain 1070][OLED Tcon error handle]display_techonlogy = 1 [CMain 1079][OLED Tcon error handle]EEPROM_TCON_ERROR_COUNT=3. [CMain 1082][OLED Tcon error handle]Go into protection mode. Disable VGA wakeup support WOL _PDWNC_SetupEthernetWakeup(WOL):u4WOWLVal:0x0 wol off, MAC register switch to arm [GPIO_MtkPowerOffFunc]1453 set GPIO 223, value 0. set GPIO 207, value 0. Standby PDWNC_TPV_SetupWakeupSourceWOWLAN: u1Wowlan = 0 PDWNC_TPV_SetupWakeupSourceWOWLAN: uiSwitchOnWithchromecast = 0 PDWNC_TPV_SetupWakeupSourceWOWLAN: u1Wowlan == DISABLE_WOWLAN CTN is not XXPUS9104 u1RedLedBriValue : 15 PDWNC_TPV_SetupSilentReboot: ui1_silent_reboot = 0 PDWNC_TPV_SetupSilentReboot: no need to setup register time of silent reboot PDWNC_EnterPowerDown(0,100) SIF_Master0: V2 design SIF_Master1: V2 design SIF_Master2: V2 design SIF_Master3: V2 design SIF_Master4: V2 design Master5 only Used in secure mode! SWITCH_T8032 ▒" Now is writting DIV_SEL as 0x78! ▒T8032 vSetTimer▒(TconError has detected, Blinking the Led [/QUOTE]
Zitate einfügen...
Authentifizierung
Antworten
Foren
Reparaturtips braune Ware
Reparatur von LCD Plasma Fernsehern sowie Beamer
Philips 65OLED803/12 Geht nicht an. Led blinkt.
Oben