Thema erstellen
Foren
Neue Beiträge
Foren durchsuchen
Aktuelles
Neue Beiträge
Neueste Aktivitäten
Blog
Anmelden
Registrieren
Aktuelles
Suche
Suche
Nur Titel durchsuchen
Von:
Neue Beiträge
Foren durchsuchen
Menü
Anmelden
Registrieren
App installieren
Installieren
Foren
Reparaturtips braune Ware
Reparatur von LCD Plasma Fernsehern sowie Beamer
Philips 65OLED803/12 Geht nicht an. Led blinkt.
JavaScript ist deaktiviert. Für eine bessere Darstellung aktiviere bitte JavaScript in deinem Browser, bevor du fortfährst.
Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden.
Du solltest ein Upgrade durchführen oder einen
alternativen Browser
verwenden.
Auf Thema antworten
Beitrag
<blockquote data-quote="wohalli" data-source="post: 370923" data-attributes="member: 85013"><p>Habs endlich hinter mir.</p><p>Ich erkenne da nichts außer TCON Error. Aber ich habe davon ja auch nicht so viel Ahnung.</p><p></p><p></p><p>Boot-set res5 0</p><p></p><p>PCB config=1, PCB ckeck=0</p><p>DRAM Channel A Calibration.</p><p>DRAM A Size = 1024 Mbytes.</p><p>DRAM Channel B Calibration.</p><p>DRAM B Size = 1024 Mbytes.</p><p>DRAM Channel C Calibration.</p><p>DRAM C Size = 512 Mbytes.</p><p>Boot</p><p>Start Pmain</p><p>0x0000a000</p><p>0x0000a000</p><p>EMMC boot</p><p></p><p>CID:0x593d658d</p><p>:0x5207a56f</p><p>:0x4a4e4234</p><p>:0x15010041</p><p>LZHS addr:0x00100040</p><p>LZHS size:0x00176848</p><p>LZHS checksum:0x00000034</p><p>LZHS size:0x00176848</p><p>store RSA & AES keys in DMX SRAM</p><p>LZHS begin</p><p>Boot</p><p>Start Lmain</p><p></p><p> POWER ON</p><p></p><p>MT5891 Boot Loader v0.9</p><p></p><p>[Check Recovery mode KEY]========================================</p><p>Boot reason: A/C power on!![Check Recovery mode KEY]PDWNC_ReadWakeupReason: 6</p><p>[Check Recovery mode KEY]PDWNC_ReadWakeupReason: 6</p><p>[Check Recovery mode KEY]PDWNC_ReadServoADCChannelValue: 1023</p><p>[Check Recovery mode KEY]PDWNC_ReadServoADCChannelValue: 3ff</p><p>[Check Recovery mode KEY]========================================</p><p>[Check Recovery mode KEY]It is LEFTRIGHTPOWER or no pressing from LKB</p><p>LOADER_MtkEnvInitFunc : ui4_RebootEventDetailEepAddr = 0xa1a</p><p>[MSDC] ext_csd is empty</p><p>get_mmcsize emmc_size2 0x00000000 00000000</p><p>[MSDC] ext_csd is empty</p><p>get_mmcsize emmc_size2 0x00000000 00000000</p><p>[MSDC] ext_csd is empty</p><p>get_mmcsize emmc_size2 0x00000000 00000000</p><p>[MSDC] ext_csd is empty</p><p>get_mmcsize emmc_size2 0x00000000 00000000</p><p>[MSDC] LOADER FAST READ EMMC!</p><p>==Loader emmc pinmux set result 0x1000a0, arbitor 0x20</p><p>Init config, cid = 0x15010041, dsc=0x593d658d,rca=0x5207a56f,ocr=0x4a4e4234</p><p>[MSDC] 15010041:4a4e4234:5207a56f:593d658d</p><p>[MSDC] id1:00414a4e id2:42345207</p><p>[MSDC] eMMC Name: UNKNOWN</p><p>---Set FIFO path and Init---</p><p>[MSDC] Set Bus Clock as HS25(MHz) Success!,src 3 ,mode 0, div 4</p><p>Use NEW AutoK idea ,ignore the old ett param</p><p>[MSDC] Set pad driving as 1 !</p><p>[eMMC2DRAM]enter into SDR50 Mode, max dtr 200000000</p><p>[MSDC] Set Bus Clock as HS0(MHz) Success!,src 0 ,mode 0, div 16</p><p>Use NEW AutoK idea ,ignore the old ett param</p><p>[MSDC] Set pad driving as 0 !</p><p>[MSDC] Set Bus Clock as HS50(MHz) Success!,src 3 ,mode 0, div 2</p><p>Use NEW AutoK idea ,ignore the old ett param</p><p>[MSDC] Set pad driving as 1 !</p><p>get_mmcsize emmc_size2 0x00000003 a3e00000</p><p>[MSDC]</p><p>Saved info: id1 = 0x658d5207, id2=0xa56f4a4e,flag 0xaabbccdd,speedmode 5, dlycell 72</p><p>Support HS400, card type ext_csd[196]0x57</p><p>Support HS200, card type ext_csd[196]0x57</p><p>u4mask = 0x3</p><p>[MSDC]</p><p> Cur info: id1 = 0x658d5207, id2=0xa56f4a4e,flag 0xaabbccdd,speedmode 5, dlycell 75</p><p>[MSDC]</p><p>-----The information is match, Alrady run autok before, ignore this time--</p><p>[MSDC] Load Param:</p><p>---Set FIFO path and Init---</p><p>[MSDC] Clock frequency = 900 MHz, Clock period = 1111 ps, 1 delay cell = 14 ps</p><p>[MSDC] TCMGET_DLYCELL_PERT = 75</p><p>===========================================</p><p></p><p> [QHB flag] rDtvCfg.u1Flags4 =0</p><p></p><p> [HB flag] rDtvCfg.u1Flags2 =0</p><p></p><p> [QHB flag] prLdrData->rDtvCfg.u1Flags4 = 0</p><p></p><p> [HB flag] prLdrData->rDtvCfg.u1Flags2 = 0</p><p>===========================================</p><p></p><p>set 223 to low.</p><p></p><p>LOADER_MtkEnvInitFunc: PDWNC_ReadWakeupReason = 6</p><p>[2K17_gpio] AC, set EEPROM_TPV_ENABLE_QHB_ADDRESS to 0</p><p></p><p>[QHB] Previous system state is on, not enter QHB.</p><p></p><p>[QHB] u1EmmcFirstBoot = 0x1</p><p>[QHB] It is not EmmcFirstBoot, do no cation with QHB.</p><p>LOADER_MtkEnvInitFunc: set ui1_reboot_event_detail to 0</p><p>LOADER_MtkEnvInitFunc: ui1_reboot_event_detail = 0 (read back)</p><p>read from eeprom ioff 0 phy_off 3360</p><p>lbz: get _u1AtmosEnable = 0</p><p>************pu1DrvLoadHdmi14Edid u1Index1= 1</p><p>lbz: get _u1AtmosEnable = 0</p><p>************pu1DrvLoadHdmi20Edid u1Index1= 1</p><p>_LOADER_ResetWiFi_1st</p><p>Support network!1st MAC in EEP is valid (70:af:24:19:9e:5b)</p><p>1st : (70:af:24:19:9e:5b)</p><p>2nd : (70:af:24:19:9e:5b)</p><p>Remove Quiet Boot misc control in eeprom when Watchdog reason.</p><p>IR DATA register : 0x 0</p><p>T8032 init A/C on case loader stage...</p><p>Load T8032 FW (addr: 0x d63fac, size: 24849)success!!</p><p>T8032 FW version: 6</p><p>T8032 change to loader stage...</p><p>header check ok</p><p>digest check ok</p><p>read done</p><p>ConsoleLock_to_T8032 (0x0)</p><p>LDR_FlashCopy 0xf010 0x71c80 0x80</p><p>LOADER_MtkEnvInitFunc : ui4_RebootEventDetailEepAddr = 0xa1a</p><p>===========================================</p><p></p><p> [QHB flag] rDtvCfg.u1Flags4 =0</p><p></p><p> [HB flag] rDtvCfg.u1Flags2 =0</p><p></p><p> [QHB flag] prLdrData->rDtvCfg.u1Flags4 = 0</p><p></p><p> [HB flag] prLdrData->rDtvCfg.u1Flags2 = 0</p><p>===========================================</p><p></p><p>set 223 to low.</p><p>header check ok</p><p>digest check ok</p><p>read done</p><p>writer done</p><p>header check ok</p><p>digest check ok</p><p>read done</p><p>CC_PHP_SUPPORT_LOADER_CONSOLE_LOCK defined</p><p>Uart Rx disabled</p><p>header check ok</p><p>digest check ok</p><p>read done</p><p>ConsoleLock_to_T8032 (0x0)</p><p>[UPG upgrade ~ PDWNC_WAKE_UP_REASON_AC_POWER] u1SlicneUpgradeStatus = 0</p><p>Org:0x30 Flags:0x30</p><p></p><p></p><p>Before u1EmmcFirstBoot = 0x1</p><p>Do not need to configure boot flag</p><p> After EmmcFirstBoot Org:0x30 Flags:0x30</p><p></p><p>After u1EmmcFirstBoot = 0x1PDWNC_Init</p><p>normal cold boot ui1_silent_reboot = 0</p><p>After check ui1_silent_reboot, [QHB]u1Flags4: org=0, flag4=0</p><p>ui4_CtnEepAddr : 0x980</p><p>CTN is not XXPUS9104</p><p>u1RedLedBriValue : 15</p><p>efrcpowerGpio=256</p><p>[OLED Tcon error handle][GPIO_MtkPowerOnFunc 1350]display_techonlogy = 1</p><p>[OLED Tcon error handle][GPIO_MtkPowerOnFunc 1354] EEPROM_TCON_ERROR_COUNT = 3</p><p>[Silent upgrade check][GPIO_MtkPowerOnFunc 1360] SILENT_UPGRADE_STATUS_ADDRESS = 0</p><p>[OLED Tcon error handle][GPIO_MtkPowerOnFunc 1368]EEPROM_TCON_ERROR_COUNT>=3, power off FRC</p><p>keep FRC power rDtvCfg.u1Flags4 = 0, PDWNC_ReadWakeupReason() = 6</p><p>After FRC power, [QHB]u1Flags4: org=0, flag4=0</p><p>eResetfrcGpio=51</p><p><GPIO_MtkPowerOnFunc> set 223 low.</p><p>USB0: Set GPIO42 = 1.</p><p>USB1: Set GPIO43 = 1.</p><p>USB2: Set GPIO44 = 1.</p><p>USB3: Set GPIO210 = 1.</p><p>Normal Boot (Not Quiet Boot)</p><p>u4BmpAddress_philips_logo:0xd8e360</p><p>u4BmpWidth_philips_logo:476</p><p>u4BmpHeight_philips_logo:242</p><p>au1PhilipsLogoBmpSize:460768</p><p>au1PhilipsLogoBmpDrawBuffer_size/2:952000</p><p>au1PhilipsLogoBmpSize/2:230384</p><p>u4DstAddress_philips_logo:0xbd3510</p><p>Display 0x00e775b4 background:0x00000000</p><p>|||||||u1FRC = au1Index 1;</p><p>[GraphMode_SetPanelType] panel_type=5</p><p>[GraphMode_SetPanelType] panel_type=1</p><p></p><p>Hardcode panel id 11 for EU11 with NT334...</p><p>[opcode::UHD=2,HDR=3,FRC=1,BACKENDPQ=0,FLIP/MIRROR=0,Channel decode 5,Frequency=1,DNM=2,IsMjcSup=52, Panel id =1,opcode end&&&&&&]</p><p>[Dynamic PNL] Find VideoModeAttribute[116]: PNL_Index=0x6000b</p><p>[DisplayInit]EU=0x39, US=0x0</p><p>[DisplayInit]CountryDefault=0x39</p><p>[SA7] vDDDSInit</p><p>[DisplayInit] ##1 SV_DCLK_50HZ</p><p>|||||||u1FRC = au1Index 1;</p><p>[LVDS]vDrvApplyPanelTiming.....</p><p>vDrvResetVOPLLFlowFlag</p><p>###VbyOne VOPLLInit finsih###vDrvSetOCLKClockSchemaInit.</p><p>###VbyOne VOPLLSet finsih###[SA7] _fgVopllUseDDDS = True</p><p>@vDrvSetVOPLLClockSchema -->normal</p><p>[LVDS] VOPLL Initialize successful !</p><p>vApiPanelPowerSequence= TRUE (START)VB1 VB1 impedance cal pass and value =4 .................</p><p>VB1 VB1 impedance cal set to default terminaion 8.........................</p><p>[VB1][LOCKN] 0x709c set to FUNCTION2</p><p>[VB1][HTPDN] 0x7097 set to FUNCTION2</p><p>[VB1][SetPadOn] DUAL_PORT</p><p>[VB1][SetPadOn] GM_LANE_1</p><p>[VB1][SetPadOn] u1LaneCnt=2, u1GraphLaneCnt=10</p><p>LVDSA_EXT_EN: B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0</p><p>LADSA_pad: ECK(L9) E4(L11) E3(L10) E2(L<img src="/styles/iwenzo/smilies/cool.png" class="smilie" loading="lazy" alt="8)" title="6 8)" data-shortname="8)" /> E1(L7) E0(L6) OCK(L3) O4(L5) O3(L4) O2(L2) O1(L1) O0(L0)</p><p>u2PadOn=0x1, pu4LaneMap[u1Lane]=8</p><p>au4PadRemapTbl[0]= 0</p><p>u2PadOn[0]=0x1</p><p>u2PadOn=0x3, pu4LaneMap[u1Lane]=9</p><p>au4PadRemapTbl[1]= 1</p><p>u2PadOn[1]=0x3</p><p>u2PadOn=0x3, pu4LaneMap[u1Lane]=10</p><p>au4PadRemapTbl[2]= 2</p><p>u2PadOn[2]=0x3</p><p>u2PadOn=0x3, pu4LaneMap[u1Lane]=11</p><p>au4PadRemapTbl[3]= 5</p><p>u2PadOn[3]=0x3</p><p>u2PadOn=0xb, pu4LaneMap[u1Lane]=0</p><p>au4PadRemapTbl[4]= 3</p><p>u2PadOn[4]=0xb</p><p>u2PadOn=0x1b, pu4LaneMap[u1Lane]=1</p><p>au4PadRemapTbl[5]= 4</p><p>u2PadOn[5]=0x1b</p><p>u2PadOn=0x1b, pu4LaneMap[u1Lane]=2</p><p>au4PadRemapTbl[6]= 6</p><p>u2PadOn[6]=0x1b</p><p>u2PadOn=0x1b, pu4LaneMap[u1Lane]=3</p><p>au4PadRemapTbl[7]= 7</p><p>u2PadOn[7]=0x1b</p><p>u2PadOn=0x1b, pu4LaneMap[u1Lane]=4</p><p>au4PadRemapTbl[8]= 8</p><p>u2PadOn[8]=0x1b</p><p>u2PadOn=0x1b, pu4LaneMap[u1Lane]=5</p><p>au4PadRemapTbl[9]= 11</p><p>u2PadOn[9]=0x1b</p><p>u2PadOn=0x1b, pu4LaneMap[u1Lane]=6</p><p>au4PadRemapTbl[10]= 9</p><p>u2PadOn[10]=0x1b</p><p>u2PadOn=0x1b, pu4LaneMap[u1Lane]=7</p><p>au4PadRemapTbl[11]= 10</p><p>u2PadOn[11]=0x1b</p><p>[VB1][SetPadOn] LVDSA_EXT_EN=0x1b</p><p>[LVDS][backlight] DeltaTime=0 us-->no need to enable BL_DLYTIME_CUT!!</p><p>LDR_isRecoveryMode function call start</p><p>LDR_OsdDisplay(14, 0x371e0000, 476, 1000)</p><p>[OSD]Before PQ Module offset:i4H=402 i4V=6</p><p>[OSD]DBG XvYCC bypass</p><p>[OSD]DBG Gamma position 0 or 1</p><p>[OSD]After PQ Module offset:i4H=259 i4V=6</p><p>display_techonlogy = 1</p><p>CTN = 65OLED803/12</p><p>OLED,delay 5 seconds for logo showing</p><p>ui1_CtnBuf[6] = 0x38 ,ui1_CtnBuf[7] = 0x30 ,ui1_CtnBuf[8] = 0x33</p><p>CTN is not XXOLED903, no need to show B&W logo</p><p>u4UpgUpgrading = 0</p><p>[LDR]_factoryCmdUpgradeByFunctionType_init is called</p><p>[LDR] ui4_upgradeDeviceTypeAddr : 0x7200</p><p>[LDR] ui1_upgradeDeviceType : 0x0</p><p>[LDR] ui1_functionType : 0x0</p><p>[LDR]_factoryCmdUpgradeByFunctionType_isSkipUpgradeEnabled is called, ui1_functionType == 4</p><p>[LDR]_factoryCmdUpgradeByFunctionType_isSkipUpgradeEnabled return FALSE</p><p></p><p>2. Teil folgt</p></blockquote><p></p>
[QUOTE="wohalli, post: 370923, member: 85013"] Habs endlich hinter mir. Ich erkenne da nichts außer TCON Error. Aber ich habe davon ja auch nicht so viel Ahnung. Boot-set res5 0 PCB config=1, PCB ckeck=0 DRAM Channel A Calibration. DRAM A Size = 1024 Mbytes. DRAM Channel B Calibration. DRAM B Size = 1024 Mbytes. DRAM Channel C Calibration. DRAM C Size = 512 Mbytes. Boot Start Pmain 0x0000a000 0x0000a000 EMMC boot CID:0x593d658d :0x5207a56f :0x4a4e4234 :0x15010041 LZHS addr:0x00100040 LZHS size:0x00176848 LZHS checksum:0x00000034 LZHS size:0x00176848 store RSA & AES keys in DMX SRAM LZHS begin Boot Start Lmain POWER ON MT5891 Boot Loader v0.9 [Check Recovery mode KEY]======================================== Boot reason: A/C power on!![Check Recovery mode KEY]PDWNC_ReadWakeupReason: 6 [Check Recovery mode KEY]PDWNC_ReadWakeupReason: 6 [Check Recovery mode KEY]PDWNC_ReadServoADCChannelValue: 1023 [Check Recovery mode KEY]PDWNC_ReadServoADCChannelValue: 3ff [Check Recovery mode KEY]======================================== [Check Recovery mode KEY]It is LEFTRIGHTPOWER or no pressing from LKB LOADER_MtkEnvInitFunc : ui4_RebootEventDetailEepAddr = 0xa1a [MSDC] ext_csd is empty get_mmcsize emmc_size2 0x00000000 00000000 [MSDC] ext_csd is empty get_mmcsize emmc_size2 0x00000000 00000000 [MSDC] ext_csd is empty get_mmcsize emmc_size2 0x00000000 00000000 [MSDC] ext_csd is empty get_mmcsize emmc_size2 0x00000000 00000000 [MSDC] LOADER FAST READ EMMC! ==Loader emmc pinmux set result 0x1000a0, arbitor 0x20 Init config, cid = 0x15010041, dsc=0x593d658d,rca=0x5207a56f,ocr=0x4a4e4234 [MSDC] 15010041:4a4e4234:5207a56f:593d658d [MSDC] id1:00414a4e id2:42345207 [MSDC] eMMC Name: UNKNOWN ---Set FIFO path and Init--- [MSDC] Set Bus Clock as HS25(MHz) Success!,src 3 ,mode 0, div 4 Use NEW AutoK idea ,ignore the old ett param [MSDC] Set pad driving as 1 ! [eMMC2DRAM]enter into SDR50 Mode, max dtr 200000000 [MSDC] Set Bus Clock as HS0(MHz) Success!,src 0 ,mode 0, div 16 Use NEW AutoK idea ,ignore the old ett param [MSDC] Set pad driving as 0 ! [MSDC] Set Bus Clock as HS50(MHz) Success!,src 3 ,mode 0, div 2 Use NEW AutoK idea ,ignore the old ett param [MSDC] Set pad driving as 1 ! get_mmcsize emmc_size2 0x00000003 a3e00000 [MSDC] Saved info: id1 = 0x658d5207, id2=0xa56f4a4e,flag 0xaabbccdd,speedmode 5, dlycell 72 Support HS400, card type ext_csd[196]0x57 Support HS200, card type ext_csd[196]0x57 u4mask = 0x3 [MSDC] Cur info: id1 = 0x658d5207, id2=0xa56f4a4e,flag 0xaabbccdd,speedmode 5, dlycell 75 [MSDC] -----The information is match, Alrady run autok before, ignore this time-- [MSDC] Load Param: ---Set FIFO path and Init--- [MSDC] Clock frequency = 900 MHz, Clock period = 1111 ps, 1 delay cell = 14 ps [MSDC] TCMGET_DLYCELL_PERT = 75 =========================================== [QHB flag] rDtvCfg.u1Flags4 =0 [HB flag] rDtvCfg.u1Flags2 =0 [QHB flag] prLdrData->rDtvCfg.u1Flags4 = 0 [HB flag] prLdrData->rDtvCfg.u1Flags2 = 0 =========================================== set 223 to low. LOADER_MtkEnvInitFunc: PDWNC_ReadWakeupReason = 6 [2K17_gpio] AC, set EEPROM_TPV_ENABLE_QHB_ADDRESS to 0 [QHB] Previous system state is on, not enter QHB. [QHB] u1EmmcFirstBoot = 0x1 [QHB] It is not EmmcFirstBoot, do no cation with QHB. LOADER_MtkEnvInitFunc: set ui1_reboot_event_detail to 0 LOADER_MtkEnvInitFunc: ui1_reboot_event_detail = 0 (read back) read from eeprom ioff 0 phy_off 3360 lbz: get _u1AtmosEnable = 0 ************pu1DrvLoadHdmi14Edid u1Index1= 1 lbz: get _u1AtmosEnable = 0 ************pu1DrvLoadHdmi20Edid u1Index1= 1 _LOADER_ResetWiFi_1st Support network!1st MAC in EEP is valid (70:af:24:19:9e:5b) 1st : (70:af:24:19:9e:5b) 2nd : (70:af:24:19:9e:5b) Remove Quiet Boot misc control in eeprom when Watchdog reason. IR DATA register : 0x 0 T8032 init A/C on case loader stage... Load T8032 FW (addr: 0x d63fac, size: 24849)success!! T8032 FW version: 6 T8032 change to loader stage... header check ok digest check ok read done ConsoleLock_to_T8032 (0x0) LDR_FlashCopy 0xf010 0x71c80 0x80 LOADER_MtkEnvInitFunc : ui4_RebootEventDetailEepAddr = 0xa1a =========================================== [QHB flag] rDtvCfg.u1Flags4 =0 [HB flag] rDtvCfg.u1Flags2 =0 [QHB flag] prLdrData->rDtvCfg.u1Flags4 = 0 [HB flag] prLdrData->rDtvCfg.u1Flags2 = 0 =========================================== set 223 to low. header check ok digest check ok read done writer done header check ok digest check ok read done CC_PHP_SUPPORT_LOADER_CONSOLE_LOCK defined Uart Rx disabled header check ok digest check ok read done ConsoleLock_to_T8032 (0x0) [UPG upgrade ~ PDWNC_WAKE_UP_REASON_AC_POWER] u1SlicneUpgradeStatus = 0 Org:0x30 Flags:0x30 Before u1EmmcFirstBoot = 0x1 Do not need to configure boot flag After EmmcFirstBoot Org:0x30 Flags:0x30 After u1EmmcFirstBoot = 0x1PDWNC_Init normal cold boot ui1_silent_reboot = 0 After check ui1_silent_reboot, [QHB]u1Flags4: org=0, flag4=0 ui4_CtnEepAddr : 0x980 CTN is not XXPUS9104 u1RedLedBriValue : 15 efrcpowerGpio=256 [OLED Tcon error handle][GPIO_MtkPowerOnFunc 1350]display_techonlogy = 1 [OLED Tcon error handle][GPIO_MtkPowerOnFunc 1354] EEPROM_TCON_ERROR_COUNT = 3 [Silent upgrade check][GPIO_MtkPowerOnFunc 1360] SILENT_UPGRADE_STATUS_ADDRESS = 0 [OLED Tcon error handle][GPIO_MtkPowerOnFunc 1368]EEPROM_TCON_ERROR_COUNT>=3, power off FRC keep FRC power rDtvCfg.u1Flags4 = 0, PDWNC_ReadWakeupReason() = 6 After FRC power, [QHB]u1Flags4: org=0, flag4=0 eResetfrcGpio=51 <GPIO_MtkPowerOnFunc> set 223 low. USB0: Set GPIO42 = 1. USB1: Set GPIO43 = 1. USB2: Set GPIO44 = 1. USB3: Set GPIO210 = 1. Normal Boot (Not Quiet Boot) u4BmpAddress_philips_logo:0xd8e360 u4BmpWidth_philips_logo:476 u4BmpHeight_philips_logo:242 au1PhilipsLogoBmpSize:460768 au1PhilipsLogoBmpDrawBuffer_size/2:952000 au1PhilipsLogoBmpSize/2:230384 u4DstAddress_philips_logo:0xbd3510 Display 0x00e775b4 background:0x00000000 |||||||u1FRC = au1Index 1; [GraphMode_SetPanelType] panel_type=5 [GraphMode_SetPanelType] panel_type=1 Hardcode panel id 11 for EU11 with NT334... [opcode::UHD=2,HDR=3,FRC=1,BACKENDPQ=0,FLIP/MIRROR=0,Channel decode 5,Frequency=1,DNM=2,IsMjcSup=52, Panel id =1,opcode end&&&&&&] [Dynamic PNL] Find VideoModeAttribute[116]: PNL_Index=0x6000b [DisplayInit]EU=0x39, US=0x0 [DisplayInit]CountryDefault=0x39 [SA7] vDDDSInit [DisplayInit] ##1 SV_DCLK_50HZ |||||||u1FRC = au1Index 1; [LVDS]vDrvApplyPanelTiming..... vDrvResetVOPLLFlowFlag ###VbyOne VOPLLInit finsih###vDrvSetOCLKClockSchemaInit. ###VbyOne VOPLLSet finsih###[SA7] _fgVopllUseDDDS = True @vDrvSetVOPLLClockSchema -->normal [LVDS] VOPLL Initialize successful ! vApiPanelPowerSequence= TRUE (START)VB1 VB1 impedance cal pass and value =4 ................. VB1 VB1 impedance cal set to default terminaion 8......................... [VB1][LOCKN] 0x709c set to FUNCTION2 [VB1][HTPDN] 0x7097 set to FUNCTION2 [VB1][SetPadOn] DUAL_PORT [VB1][SetPadOn] GM_LANE_1 [VB1][SetPadOn] u1LaneCnt=2, u1GraphLaneCnt=10 LVDSA_EXT_EN: B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 LADSA_pad: ECK(L9) E4(L11) E3(L10) E2(L8) E1(L7) E0(L6) OCK(L3) O4(L5) O3(L4) O2(L2) O1(L1) O0(L0) u2PadOn=0x1, pu4LaneMap[u1Lane]=8 au4PadRemapTbl[0]= 0 u2PadOn[0]=0x1 u2PadOn=0x3, pu4LaneMap[u1Lane]=9 au4PadRemapTbl[1]= 1 u2PadOn[1]=0x3 u2PadOn=0x3, pu4LaneMap[u1Lane]=10 au4PadRemapTbl[2]= 2 u2PadOn[2]=0x3 u2PadOn=0x3, pu4LaneMap[u1Lane]=11 au4PadRemapTbl[3]= 5 u2PadOn[3]=0x3 u2PadOn=0xb, pu4LaneMap[u1Lane]=0 au4PadRemapTbl[4]= 3 u2PadOn[4]=0xb u2PadOn=0x1b, pu4LaneMap[u1Lane]=1 au4PadRemapTbl[5]= 4 u2PadOn[5]=0x1b u2PadOn=0x1b, pu4LaneMap[u1Lane]=2 au4PadRemapTbl[6]= 6 u2PadOn[6]=0x1b u2PadOn=0x1b, pu4LaneMap[u1Lane]=3 au4PadRemapTbl[7]= 7 u2PadOn[7]=0x1b u2PadOn=0x1b, pu4LaneMap[u1Lane]=4 au4PadRemapTbl[8]= 8 u2PadOn[8]=0x1b u2PadOn=0x1b, pu4LaneMap[u1Lane]=5 au4PadRemapTbl[9]= 11 u2PadOn[9]=0x1b u2PadOn=0x1b, pu4LaneMap[u1Lane]=6 au4PadRemapTbl[10]= 9 u2PadOn[10]=0x1b u2PadOn=0x1b, pu4LaneMap[u1Lane]=7 au4PadRemapTbl[11]= 10 u2PadOn[11]=0x1b [VB1][SetPadOn] LVDSA_EXT_EN=0x1b [LVDS][backlight] DeltaTime=0 us-->no need to enable BL_DLYTIME_CUT!! LDR_isRecoveryMode function call start LDR_OsdDisplay(14, 0x371e0000, 476, 1000) [OSD]Before PQ Module offset:i4H=402 i4V=6 [OSD]DBG XvYCC bypass [OSD]DBG Gamma position 0 or 1 [OSD]After PQ Module offset:i4H=259 i4V=6 display_techonlogy = 1 CTN = 65OLED803/12 OLED,delay 5 seconds for logo showing ui1_CtnBuf[6] = 0x38 ,ui1_CtnBuf[7] = 0x30 ,ui1_CtnBuf[8] = 0x33 CTN is not XXOLED903, no need to show B&W logo u4UpgUpgrading = 0 [LDR]_factoryCmdUpgradeByFunctionType_init is called [LDR] ui4_upgradeDeviceTypeAddr : 0x7200 [LDR] ui1_upgradeDeviceType : 0x0 [LDR] ui1_functionType : 0x0 [LDR]_factoryCmdUpgradeByFunctionType_isSkipUpgradeEnabled is called, ui1_functionType == 4 [LDR]_factoryCmdUpgradeByFunctionType_isSkipUpgradeEnabled return FALSE 2. Teil folgt [/QUOTE]
Zitate einfügen...
Authentifizierung
Antworten
Foren
Reparaturtips braune Ware
Reparatur von LCD Plasma Fernsehern sowie Beamer
Philips 65OLED803/12 Geht nicht an. Led blinkt.
Oben