Thema erstellen
Foren
Neue Beiträge
Foren durchsuchen
Aktuelles
Neue Beiträge
Neueste Aktivitäten
Blog
Anmelden
Registrieren
Aktuelles
Suche
Suche
Nur Titel durchsuchen
Von:
Neue Beiträge
Foren durchsuchen
Menü
Anmelden
Registrieren
App installieren
Installieren
Foren
Reparaturtips braune Ware
Reparatur von LCD Plasma Fernsehern sowie Beamer
Philips 55PUS6412/12 Kein Bild, nur blaues Display, HGB geht an
JavaScript ist deaktiviert. Für eine bessere Darstellung aktiviere bitte JavaScript in deinem Browser, bevor du fortfährst.
Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden.
Du solltest ein Upgrade durchführen oder einen
alternativen Browser
verwenden.
Auf Thema antworten
Beitrag
<blockquote data-quote="tik-tak" data-source="post: 370935" data-attributes="member: 18080"><p>Philips 55PUS6412/12 beim anmachen geht HGB an und bleibt mit blauem Display stehen. Mit Fernbedienung geht an, sonst keine weitere Reaktion auf Fernbedienung.</p><p>Panel: TPT550U2-D072.L REV: S01N 2D</p><p>TCon ST5461D07-2-XC-1 auf Leisten Panel mitintergriert.</p><p></p><p>Spannungen TCon ST5461D07-2-XC-1</p><p>F1 5А 32V - +11,85В, Widerstand auf GND 1,198 kOhm</p><p>VDD18: +1,884V, Widerstand auf GND 460 Ohm</p><p>VDD12: +1,306V, Widerstand auf GND 69,3 Ohm</p><p>VDD33: +3,35V, Widerstand auf GND 7,7 kOhm</p><p>VGHF: +27,96V, Widerstand auf GND 26,2 kOhm</p><p>VGL: -7,89V, Widerstand auf GND 5,02 kOhm</p><p>VSS1: -5,89V, Widerstand auf GND 46,6 kOhm</p><p>HVAA: +7,9V , Widerstand auf GND 2,7 MOhm</p><p>BK_SEL: +0,062V, Widerstand auf GND 4,7 MOhm</p><p>VREF: +14,7V, Widerstand auf GND 8,4 kOhm</p><p>VCOM: +6,45V, Widerstand auf GND 2,36 MOhm</p><p>R_VAA: +15,29V, Widerstand auf GND 8,4 kOhm</p><p>L_VAA: +15,29V, Widerstand auf GND 8,4 kOhm</p><p>AVDD: +15,3V</p><p></p><p>Spannungen Mainboard</p><p>C4344: +1,8V oK</p><p>L4304: +3,5V oK</p><p>C4457: +12,1V oK</p><p>C4309: +3,28V oK</p><p>L4101: +2,48V oK</p><p>CM47: +1,53V oK</p><p>C4259: +5V oK</p><p>Q4306: +12V oK</p><p>U4103: 1,12V. Widerstand auf GND 120 Ohm.</p><p></p><p>C777: 0V - Spannung TUNER_LNB nOk.</p><p>R777: +3,3V</p><p>D750: +12V</p><p></p><p>Alle Spannungen ausser +12V für Tuner Pin1 da. Diese 12V Softwaremässig werden geschalten nehme an.</p><p></p><p>Bootlog bleibt beim Initialisierung hängen:</p><p>0.0.0.0</p><p>In: serial</p><p>Out: serial</p><p>Err: serial</p><p>Net: init MMAC driver</p><p></p><p>Für mich bedeutet, entweder I²Bus kaputt oder irgendeines Bauteil in der Kette platt.</p></blockquote><p></p>
[QUOTE="tik-tak, post: 370935, member: 18080"] Philips 55PUS6412/12 beim anmachen geht HGB an und bleibt mit blauem Display stehen. Mit Fernbedienung geht an, sonst keine weitere Reaktion auf Fernbedienung. Panel: TPT550U2-D072.L REV: S01N 2D TCon ST5461D07-2-XC-1 auf Leisten Panel mitintergriert. Spannungen TCon ST5461D07-2-XC-1 F1 5А 32V - +11,85В, Widerstand auf GND 1,198 kOhm VDD18: +1,884V, Widerstand auf GND 460 Ohm VDD12: +1,306V, Widerstand auf GND 69,3 Ohm VDD33: +3,35V, Widerstand auf GND 7,7 kOhm VGHF: +27,96V, Widerstand auf GND 26,2 kOhm VGL: -7,89V, Widerstand auf GND 5,02 kOhm VSS1: -5,89V, Widerstand auf GND 46,6 kOhm HVAA: +7,9V , Widerstand auf GND 2,7 MOhm BK_SEL: +0,062V, Widerstand auf GND 4,7 MOhm VREF: +14,7V, Widerstand auf GND 8,4 kOhm VCOM: +6,45V, Widerstand auf GND 2,36 MOhm R_VAA: +15,29V, Widerstand auf GND 8,4 kOhm L_VAA: +15,29V, Widerstand auf GND 8,4 kOhm AVDD: +15,3V Spannungen Mainboard C4344: +1,8V oK L4304: +3,5V oK C4457: +12,1V oK C4309: +3,28V oK L4101: +2,48V oK CM47: +1,53V oK C4259: +5V oK Q4306: +12V oK U4103: 1,12V. Widerstand auf GND 120 Ohm. C777: 0V - Spannung TUNER_LNB nOk. R777: +3,3V D750: +12V Alle Spannungen ausser +12V für Tuner Pin1 da. Diese 12V Softwaremässig werden geschalten nehme an. Bootlog bleibt beim Initialisierung hängen: 0.0.0.0 In: serial Out: serial Err: serial Net: init MMAC driver Für mich bedeutet, entweder I²Bus kaputt oder irgendeines Bauteil in der Kette platt. [/QUOTE]
Zitate einfügen...
Authentifizierung
Antworten
Foren
Reparaturtips braune Ware
Reparatur von LCD Plasma Fernsehern sowie Beamer
Philips 55PUS6412/12 Kein Bild, nur blaues Display, HGB geht an
Oben